2007 - 2016
HARLEY-DAVIDSON ROAD KING
Chain-driven camshaft set for harley davidson twin cam engines
| ANDREWS
Fits to:
Harley Davidson FLHR 1690 Road King [2012 - 2015]
Harley Davidson FLHR 1584 ABS Road King [2010 - 2011]
Harley Davidson FLHR 1690 ABS Road King [2016 - 2016]
Harley Davidson FLHR 1584 Road King [2007 - 2008]
Harley Davidson FLHR 1584 ABS Road King [2008 - 2009]
Harley Davidson FLHR 1690 ABS Road King [2012 - 2015]
Harley Davidson FLHR 1690 ABS Road King 110th Anniversary [2013 - 2013]
Harley Davidson FLHR 1584 Road King [2009 - 2011]
Specifications
| Manufacturer | ANDREWS |
|---|---|
| Type | Chain |
| Exhaust lift imperial | 0.560" |
| Exhaust duration | 240° |
| Exhaust lift | 0,560" |
| Intake duration | 236° |
| Intake lift | 0,560" |
| Application | Exhaust| Intake |
| Exhaust close | 14° |
| Exhaust open | 38° |
| Intake close | 46° |
| Intake open | 18° |
| Units | Pair |
| Exhaust lift at tdc | 0,153" |
| Grind | 57 Series |
| Exhaust lobe centerline | 106° |
| Intake lobe centerline | 100° |
| Intake lift at tdc | 0,184" |
| Intake lift at tdc imperial | 0.184" |
| Exhaust open imperial | 38° |
| Exhaust lift at tdc imperial | 0.153" |
| Intake duration imperial | 236° |
| Intake open imperial | 18° |
| Intake close imperial | 46° |
| Intake lift imperial | 0.560" |
| Exhaust duration imperial | 240° |
| Exhaust close imperial | 14° |
| Exhaust lobe centerline imperial | 106° |
| Intake lobe centerline imperial | 100° |
Product description
Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets Similar to the EV-23 cam All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications). Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.
Bolt-in broad tip cam; 96", 103" limited and 110" CVO engines
Cams work best at RPM range of 2200-5600