2000 - 2006
HARLEY-DAVIDSON SOFTAIL DEUCE
Kumštelinio velenėlio konversija 12n
| ANDREWS
Tinka:
Harley Davidson FXSTDSE 1550 Softail Deuce Screamin Eagle [2003 - 2003]
Harley Davidson FXSTDI 1450 EFI Softail Deuce [2006 - 2006]
Harley Davidson FXSTDSE2 1550 Softail Deuce Screamin Eagle [2004 - 2004]
Harley Davidson FXSTD 1450 Softail Deuce [2000 - 2003]
Harley Davidson FXSTDI 1450 EFI Softail Deuce [2001 - 2005]
Harley Davidson FXSTD 1450 Softail Deuce [2004 - 2006]
Specifikacijos
| Gamintojas | ANDREWS |
|---|---|
| Tipas | Chain |
| Išmetimo trukmė | 222° |
| Išmetimo sistemos keltuvas | 0,489" |
| Įsiurbimo trukmė | 216° |
| Įsiurbimo liftas | 0,489" |
| Paraiška | Exhaust| Intake |
| Išmetimo sistemos uždarymas | 2° |
| Išmetimo anga atidaryta | 40° |
| Įsiurbimo uždarymas | 34° |
| Įsiurbimo anga atidaryta | 2° |
| Funkcijos | Can Be Used with Stock Springs and Tappets |
| Vienetai | Pair |
| Išmetimo kėlimas prie tdc | 0,095" |
| Šlifavimas | 12 Series |
| Išmetimo lęšio vidurio linija | 109° |
| Įsiurbimo sklendės vidurio linija | 106° |
| Įsiurbimo pakėlimas prie tdc | 0,091" |
| Išmetimo sistemos keltuvas imperial | 0.489" |
| Įsiurbimo pakėlimas prie tdc imperial | 0.091" |
| Išmetimo sistemos atviras imperial | 40° |
| Išmetimo sistemos pakilimas prie tdc imperial | 0.095" |
| Įsiurbimo trukmė imperial | 216° |
| Įsiurbimo sistema open imperial | 2° |
| Įsiurbimo uždarymas imperial | 34° |
| Įsiurbimo kėliklis imperial | 0.489" |
| Išmetimo trukmė imperial | 222° |
| Išmetimo sistemos uždarymas imperial | 2° |
| Išmetimo lęšio vidurio linija imperial | 109° |
| Įsiurbimo sklendės vidurio linija imperial | 106° |
Produkto aprašymas
Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately) A list of required components is supplied with each set of cams Performance should be similar to earlier bikes with the same cam grinds Made in the U.S.A. 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06 Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance
Bolt-in cams with the same output as the stock cams
Slight power increase when compared to stock
No returning of the stock system is necessary
Can be used with stock valve springs and tappets