2007 - 2007
HARLEY-DAVIDSON HERITAGE SPRINGER SOFTAIL CLASSIC
Paskirstymo velenų rinkinys 551c su grandinine pavara
| S&S CYCLE
Tinka:
Harley Davidson FLSTSC 1584 Softail Springer Classic [2007 - 2007]
Specifikacijos
| Gamintojas | S&S CYCLE |
|---|---|
| Išmetimo trukmė | 238° |
| Išmetimo sistemos keltuvas | 0,550" |
| Įsiurbimo trukmė | 216° |
| Įsiurbimo liftas | 0,550" |
| Paraiška | Exhaust| Intake |
| Išmetimo sistemos uždarymas | 17° |
| Išmetimo anga atidaryta | 41° |
| Įsiurbimo uždarymas | 19° |
| Įsiurbimo anga atidaryta | 17° |
| Tipas | Chain |
| Vienetai | Kit |
| Išmetimo kėlimas prie tdc | 0,170" |
| Šlifavimas | 551 Series |
| Išmetimo lęšio vidurio linija | 102° |
| Įsiurbimo sklendės vidurio linija | 91° |
| Įsiurbimo pakėlimas prie tdc | 0,178" |
| Išmetimo sistemos keltuvas imperial | 0.550" |
| Įsiurbimo pakėlimas prie tdc imperial | 0.178" |
| Išmetimo sistemos atviras imperial | 41° |
| Išmetimo sistemos pakilimas prie tdc imperial | 0.170" |
| Įsiurbimo trukmė imperial | 216° |
| Įsiurbimo sistema open imperial | 17° |
| Įsiurbimo uždarymas imperial | 19° |
| Įsiurbimo kėliklis imperial | 0.550" |
| Išmetimo trukmė imperial | 238° |
| Išmetimo sistemos uždarymas imperial | 17° |
| Išmetimo lęšio vidurio linija imperial | 102° |
| Įsiurbimo sklendės vidurio linija imperial | 91° |
Produkto aprašymas
Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams A hydraulic press and other professional-level tools are required to install these kits Cam bearings and gaskets must be replaced when installing new cams Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Due to the inherent characteristics of gear drives, you may experience more valve train noise. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U.S.A.