2000 - 2006
HARLEY-DAVIDSON SOFTAIL STANDARD
Chain-driven camshaft set for twin cam engines
| ANDREWS
Fits to:
Harley Davidson FXSTI 1450 EFI Softail [2003 - 2003]
Harley Davidson FXST 1450 Softail [2004 - 2006]
Harley Davidson FXSTI 1450 EFI Softail [2004 - 2006]
Harley Davidson FXST 1450 Softail [2000 - 2003]
Specifications
| Manufacturer | ANDREWS |
|---|---|
| Intake lift | 0,555" |
| Exhaust duration | 238° |
| Exhaust lift | 0,555" |
| Intake duration | 238° |
| Application | Exhaust| Intake |
| Exhaust close | 15° |
| Exhaust open | 43° |
| Intake close | 42° |
| Intake open | 16° |
| Type | Chain |
| Units | Pair |
| Exhaust lift at tdc | 0,158" |
| Grind | 54 Series |
| Exhaust lobe centerline | 104° |
| Intake lobe centerline | 103° |
| Intake lift at tdc | 0,165" |
| Exhaust lift imperial | 0.555" |
| Intake lift at tdc imperial | 0.165" |
| Exhaust open imperial | 43° |
| Exhaust lift at tdc imperial | 0.158" |
| Intake duration imperial | 238° |
| Intake open imperial | 16° |
| Intake close imperial | 42° |
| Intake lift imperial | 0.555" |
| Exhaust duration imperial | 238° |
| Exhaust close imperial | 15° |
| Exhaust lobe centerline imperial | 104° |
| Intake lobe centerline imperial | 103° |
Product description
Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets Similar to the EV-23 cam All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications). Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.
Requires high-lift springs