2006 - 2017
HARLEY-DAVIDSON DYNA STREET BOB/SPECIAL
Chain-driven camshaft set for harley davidson twin cam 2007-2017
| ANDREWS
Fits to:
Harley Davidson FXDBA 1584 Dyna Street Bob Limited [2013 - 2013]
Harley Davidson FXDBP 1690 ABS Dyna Street Bob Factory Custom [2013 - 2016]
Harley Davidson FXDBB 1690 Dyna Street Bob Special [2014 - 2015]
Harley Davidson FXDBI 1450 EFI Dyna Street Bob [2006 - 2006]
Harley Davidson FXDBB 1690 A Dyna Street Bob Special [2014 - 2015]
Harley Davidson FXDB 1690 Dyna Street Bob [2017 - 2017]
Harley Davidson FXDB 1584 ABS Dyna Street Bob [2012 - 2013]
Harley Davidson FXDBA 1584 ABS Dyna Street Bob Limited [2013 - 2013]
Harley Davidson FXDBC 1690 A Dyna Street Bob Limited [2016 - 2016]
Harley Davidson FXDBC 1690 Dyna Street Bob Limited [2016 - 2016]
Harley Davidson FXDB 1690 ABS Dyna Street Bob [2014 - 2017]
Harley Davidson FXDBP 1690 Dyna Street Bob Factory Custom [2013 - 2016]
Harley Davidson FXDB 1690 Dyna Street Bob [2014 - 2016]
Harley Davidson FXDB 1584 Dyna Street Bob [2007 - 2013]
Harley Davidson FXDBA 1690 Dyna Street Bob Limited [2013 - 2013]
Harley Davidson FXDBA 1690 ABS Dyna Street Bob Limited [2013 - 2013]
Specifications
| Manufacturer | ANDREWS |
|---|---|
| Exhaust duration | 252° |
| Exhaust lift | 0,486" |
| Intake duration | 242° |
| Intake lift | 0,492" |
| Application | Exhaust| Intake |
| Exhaust close | 8° |
| Exhaust open | 40° |
| Intake close | 28° |
| Intake open | 2° |
| Units | Pair |
| Grind | 9 Series |
| Exhaust lift imperial | 0.486" |
| Exhaust open imperial | 40° |
| Intake duration imperial | 242° |
| Intake open imperial | 2° |
| Intake close imperial | 28° |
| Intake lift imperial | 0.492" |
| Exhaust duration imperial | 252° |
| Exhaust close imperial | 8° |
Product description
Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are utilized. Furthermore, the power in Harley's Twin Cam engine can be made even more convincing when superior Andrews computer-designed high-performance cams are installed. Bolt-in cam with more power through the entire rpm range (1000-5400 rpm) Use stock springs All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications). Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.